Roomba Error 26: What It Means and How to Fix It

Are you experiencing Roomba error 26? This error can be frustrating, but it’s also fixable. In this article, we’ll go over what the error means, the reasons why it might be happening, and how to fix it. By the end of this article, you’ll be equipped with the knowledge you need to troubleshoot your Roomba and get it back up and running.

Roomba Error 26

What is Roomba error 26?

Roomba error 26 is an error code that indicates a problem with your Roomba’s bumper. Specifically, it means that the bumper is stuck in an abnormal position. This can happen if the bumper is obstructed by debris or if your Roomba is stuck under furniture.

Why is Roomba error 26 happening?

There are a few reasons why you might be experiencing Roomba error 26. Some of the most common include:

  1. Obstructions: If your Roomba’s bumper is obstructed by debris or other objects, it can get stuck in an abnormal position and trigger the error code.
  2. Stuck under furniture: If your Roomba gets stuck under furniture, it can cause the bumper to get stuck in an abnormal position.
  3. Damaged bumper: If your Roomba’s bumper is damaged, it may not be able to move freely, which can cause the error code to appear.

How to fix Roomba error 26?

Fixing Roomba error 26 is usually a straightforward process. Here’s how to do it:

  • Step 1: Turn off your Roomba and remove it from its charging base.
  • Step 2: Check the bumper for any debris or obstructions.
  • Step 3: Gently push the bumper to make sure it moves freely.
  • Step 4: If the bumper is stuck, gently try to move it back into its normal position.
  • Step 5: If the bumper still does not move, you may need to remove the bumper and clean it.
  • Step 6: Once the bumper is clean and free of obstructions, reinstall it onto your Roomba.
  • Step 7: Turn your Roomba back on and test it to make sure the error 26 has been resolved.

Let’s go into more detail about each step.

Step 1: Turn off your Roomba and remove it from its charging base.

The first step in fixing Roomba error 26 is to turn off your Roomba and remove it from its charging base. This will ensure that your Roomba is not moving around while you’re trying to fix it, which could be dangerous.

Step 2: Check the bumper for any debris or obstructions.

Next, check the bumper for any debris or obstructions. This could include things like dust, dirt, or pet hair. If you see any obstructions, use a soft-bristled brush or cloth to gently remove them.

Step 3: Gently push the bumper to make sure it moves freely.

After you’ve cleared any obstructions, gently push the bumper to make sure it moves freely. If it doesn’t move, you may need to try to move it back into its normal position.

Step 4: If the bumper is stuck, gently try to move it back into its normal position.

If the bumper is stuck in an abnormal position, try to gently move it back into its normal position. You can use your fingers or a soft object like a pencil eraser to do this. Be careful not to force the bumper, as this could cause further damage.

Step 5: If the bumper still does not move, you may need to remove the bumper and clean it.

If the bumper is still stuck after you’ve tried to move it back into its normal position, you may need to remove it and clean it. Here’s how to do that:

  1. Remove the bumper: To remove the bumper, use a screwdriver to remove any screws holding it in place. Then, gently pull the bumper away from the Roomba.
  2. Clean the bumper: Once you’ve removed the bumper, use a soft-bristled brush or cloth to clean it. You can also use compressed air to blow away any dust or debris.
  3. Reinstall the bumper: Once the bumper is clean, reinstall it onto your Roomba. Make sure that it’s securely in place and that any screws are tightened.

Step 6: Turn your Roomba back on and test it to make sure error 26 has been resolved.

After you’ve cleaned or repositioned the bumper, turn your Roomba back on and test it to make sure the error code has been resolved. If the error code is still present, you may need to contact iRobot customer support for further assistance.

Read Also: Hulu Error Code 406: Reasons and How to Fix it

Conclusion

Roomba error 26 is a common issue that can be caused by a variety of factors, including obstructions, furniture, and a damaged bumper. However, it’s usually fixable with a few simple steps. By following the procedures outlined in this article, you can troubleshoot and fix Roomba error 26 on your own. Remember to be patient and take your time when working on your Roomba, and always prioritize safety above all else.