Canon ts3322 error codes

Canon printers are known for their reliability and excellent print quality. However, like any electronic device, they can encounter errors from time to time. One common issue faced by Canon TS3322 printer users is error codes. These error codes appear on the printer’s display panel and can cause frustration and disruption to your printing tasks. In this article, we will discuss some of the most common Canon TS3322 error codes, their causes, and provide step-by-step solutions to resolve them. By following these troubleshooting procedures, you can quickly get your Canon TS3322 printer back to working condition and minimize downtime.

Understanding Canon TS3322 Error Codes 

Canon TS3322 printers use error codes to indicate specific issues or malfunctions within the device. These codes help users identify the root cause of the problem and take appropriate actions to resolve them. By understanding the meaning behind the error codes, you can troubleshoot your printer more effectively.

Canon ts3322 error codes
Canon ts3322 error codes

Common Reasons for Canon TS3322 Error Codes:

  1. Improper Paper Loading:
    • When paper is not loaded correctly, it can lead to paper jams and error codes like E02.
    • Causes include using crumpled or wrinkled paper, overloading the paper tray, or incorrect paper alignment.
  2. Worn-out Rollers:
    • Over time, the rollers in the printer can become worn, resulting in difficulty feeding the paper properly.
    • This issue often leads to error codes such as E02 or E03.
  3. Low or Empty Ink Cartridges:
    • When the ink cartridges reach low or empty levels, the printer may display error codes like E04 or E15.
    • This issue can occur if the printer fails to recognize the ink levels accurately.
  4. Incorrect Cartridge Installation:
    • If the FINE cartridges are not installed correctly, error codes like E07 or E15 may appear.
    • This can happen when the cartridges are not securely seated or not aligned properly.
  5. Faulty Cartridges or Print Head:
    • Sometimes, error codes may indicate issues with the cartridges or print head.
    • Faulty cartridges or a malfunctioning print head can result in error codes like E14 or E16.

How to Fix Canon TS3322 Error Codes?

Fix 1: Resolving Error Code E02 – Paper Jam

Error Code E02 on the Canon TS3322 printer indicates a paper jam. Follow these detailed steps to resolve the issue:

Step 1: Turn off the printer and unplug it from the power source

  • This ensures your safety while working on the printer and prevents any electrical mishaps.

Step 2: Open the printer’s paper output cover and remove any visible jammed paper

Follow steps:

  • Gently lift the cover to access the paper path.
  • Carefully remove any loose or crumpled paper that you can see. Take extra caution not to tear the paper during removal.

Step 3: Check the rear tray for any stuck paper and remove it, if applicable

  • If your printer has a rear tray, pull it out gently.
  • Inspect the tray for any paper jams or obstructions.
  • If you find any stuck paper, carefully pull it out in the direction of the paper path.

Step 4: Inspect the paper path and remove any foreign objects

Follow steps:

  • Use a flashlight to examine the paper path inside the printer.
  • Look for any foreign objects, such as paper clips or bits of torn paper.
  • If you find any, carefully remove them to ensure smooth paper feeding.

Step 5: Close the paper output cover and plug in the printer. Turn it on and resume printing

  • Close the printer’s paper output cover securely until it clicks into place.
  • Plug in the power cord and ensure a stable power supply.
  • Turn on the printer and wait for it to initialize.
  • Try printing a test page to confirm if the error has been resolved.

By following these steps, you should be able to clear the paper jam and resolve Error Code E02 on your Canon TS3322 printer. However, if the error persists or if you encounter any difficulties during the troubleshooting process, it is recommended to consult the printer’s user manual or reach out to Canon support for further assistance.

Fix 2: Resolving Error Code E03 – Paper Jam or Output Tray Closed

Error Code E03 on the Canon TS3322 printer indicates a paper jam or a closed output tray. Follow these detailed steps to resolve the issue:

Step 1: Turn off the printer and disconnect the power cord

  • This ensures your safety and prevents any electrical accidents while working on the printer.

Step 2: Open the paper output tray and check for obstructions

Follow steps:

  • Locate the paper output tray, usually located at the front or top of the printer.
  • Inspect the tray to ensure it is not closed or obstructed.
  • If the tray is closed, gently open it to its fully extended position.

Step 3: Remove any jammed paper or foreign objects from the paper output area

  • Look inside the paper output area for any visible paper jams or foreign objects.
  • If you find any paper jams, carefully remove them by gently pulling in the direction of the paper path.
  • Check for any foreign objects such as clips, small pieces of paper, or debris. Remove them as well.

Step 4: Close the paper output tray securely

Follow steps:

  • Once you have cleared any obstructions or paper jams, ensure that the paper output tray is properly closed.
  • Gently push the tray back into its original position until it clicks into place.

Step 5: Reconnect the power cord, turn on the printer, and check if the error is resolved

  • Plug the power cord back into the printer and ensure it is securely connected to a power source.
  • Turn on the printer and wait for it to initialize.
  • Attempt to print a test page to verify if the error has been resolved.

By following these steps, you should be able to clear any paper jams and resolve Error Code E03 on your Canon TS3322 printer. If the error persists or if you encounter any difficulties during the troubleshooting process, it is advisable to consult the printer’s user manual or contact Canon support for further assistance.

Fix 3: Resolving Error Code E04 – Ink Cartridge Issues

Error Code E04 on the Canon TS3322 printer indicates a problem with the ink cartridges. Follow these detailed steps to resolve the issue:

Step 1: Check if the ink cartridges are empty

  • Open the printer’s ink cartridge access door or panel.
  • Check the ink levels of each cartridge to determine if any are empty or low on ink.
  • If you find empty cartridges, replace them with new ones.

Step 2: Ensure the ink cartridges are properly installed

Follow steps:

  • Remove each ink cartridge from its slot and inspect it for any protective tape or plastic covers.
  • If there is any protective tape, carefully remove it without touching the gold contacts or ink nozzles.
  • Insert the cartridges back into their respective slots, making sure they are securely seated.

Step 3: Reset the ink cartridge counter

  • Some Canon printers require a manual reset of the ink cartridge counter to recognize newly installed cartridges.
  • Refer to your printer’s user manual or Canon’s official website for instructions on how to reset the ink cartridge counter.

Step 4: Perform a printer reset

Follow steps:

  • Turn off the printer and unplug it from the power source.
  • Wait for a few minutes to allow the printer to completely power down.
  • Plug in the printer and turn it back on.
  • Check if the error code E04 has been cleared and if the printer recognizes the ink cartridges.

Step 5: Test print and monitor ink levels

  • Print a test page to ensure the printer is functioning properly after resolving the error.
  • Monitor the ink levels regularly to avoid running out of ink and encountering future cartridge-related errors.

By following these steps, you should be able to address ink cartridge issues associated with Error Code E04 on your Canon TS3322 printer. If the error persists or if you require further assistance, consult the printer’s user manual or contact Canon support for additional guidance.

Fix 4: Resolving Error Code E05 – FINE Cartridge Cannot Be Recognized

Error Code E05 on the Canon TS3322 printer indicates that the printer cannot detect the installed ink cartridges. Follow these detailed steps to resolve the issue:

Step 1: Remove and reinsert the ink cartridges

  • Open the printer’s ink cartridge access door or panel.
  • Carefully remove each ink cartridge from its slot.
  • Check the cartridges for any protective tape or covers and remove them if present.
  • Reinsert the cartridges back into their respective slots, ensuring they are securely seated.

Step 2: Clean the cartridge contacts

Follow steps:

  • Turn off the printer and unplug it from the power source.
  • Remove the ink cartridges from their slots.
  • Dampen a lint-free cloth or cotton swab with distilled water.
  • Gently clean the gold contacts on the cartridges and the corresponding contacts inside the printer.
  • Allow the contacts to dry completely before reinstalling the cartridges.

Step 3: Perform a printer reset

  • Plug in the printer and turn it on.
  • If the error code persists, perform a reset on the printer.
  • Consult the printer’s user manual or Canon’s official website for instructions on how to perform a reset.

Step 4: Try using different ink cartridges

Follow steps:

  • If the error persists after cleaning the contacts and resetting the printer, it is possible that the ink cartridges are faulty.
  • Borrow or purchase a new set of compatible ink cartridges and install them in the printer.
  • Check if the printer recognizes the new cartridges and if the error code E05 is resolved.

Step 5: Contact Canon support

  • If the error code continues to appear even with different cartridges, it is advisable to contact Canon support for further assistance.
  • Provide them with the details of the troubleshooting steps you have taken so far for a more efficient resolution.

By following these steps, you should be able to address the issue of the FINE cartridges not being recognized, as indicated by Error Code E05 on your Canon TS3322 printer. If the error persists or if you require additional guidance, reach out to Canon support for further assistance.

Read more: Security Prevents Use Of Camera

Fix 5: Resolving Error Code E07 – Cartridge Not Installed Properly

Error Code E07 on the Canon TS3322 printer indicates that the cartridge is not installed properly. Follow these detailed steps to resolve the issue:

Step 1: Turn off the printer and unplug it from the power source

  • This ensures your safety while working on the printer and prevents any electrical mishaps.

Step 2: Open the printer’s ink cartridge access door or panel

Follow steps:

  • Locate the area where the cartridges are installed. It is usually accessible by lifting a cover or panel.

Step 3: Remove the cartridges and inspect them

  • Carefully remove each ink cartridge from its slot.
  • Check the cartridges for any protective tape, covers, or debris. Remove them if present.
  • Examine the cartridges for any visible damage or abnormalities.

Step 4: Reinstall the cartridges correctly

Follow steps:

  • Insert each cartridge back into its respective slot, ensuring they are securely seated.
  • Pay attention to the correct placement and alignment of the cartridges.

Step 5: Close the ink cartridge access door or panel

  • Ensure that the door or panel is closed properly until it clicks into place.

Step 6: Plug in the printer and turn it on

Follow steps:

  • Plug the power cord back into the printer and ensure it is securely connected to a power source.
  • Turn on the printer and wait for it to initialize.

Step 7: Check if the error code E07 has been cleared

  • Print a test page or perform a self-test to confirm if the printer recognizes the cartridges and the error is resolved.

If the error code persists or if you encounter any difficulties during the troubleshooting process, it is recommended to consult the printer’s user manual or contact Canon support for further assistance.

Fix 6: Resolving Error Code E16 – Ink Remaining Unknown

Error Code E16 on the Canon TS3322 printer indicates that the printer cannot determine the remaining ink level of the installed cartridges. Follow these detailed steps to resolve the issue:

Step 1: Press and hold the Stop/Reset button

  • Locate the Stop/Reset button on the printer. It is usually represented by a triangle within a circle icon.
  • Press and hold the button for approximately 5 seconds.

Step 2: Release the Stop/Reset button

Follow steps:

  • After holding the button for 5 seconds, release it.

Step 3: Check the printer’s display

  • The printer’s display should show a message indicating that the ink monitoring has been disabled.
  • This means that the printer will no longer display the remaining ink level, but it allows you to continue printing.

Step 4: Resume printing

Follow steps:

  • You can now resume printing as usual, even though the ink levels are not being displayed.

Step 5: Monitor ink usage manually

  • Since the ink levels are no longer displayed, it is important to monitor the ink usage manually.
  • Keep track of the number of pages printed or the print quality to determine when the cartridges may need replacement.

Step 6: Replace the cartridges when necessary

  • When you notice a decline in print quality or if the printer indicates that a cartridge is empty, replace the corresponding cartridge.
  • Follow the steps outlined in the printer’s user manual to properly replace the ink cartridges.

By following these steps, you should be able to resolve Error Code E16 and continue using your Canon TS3322 printer without the ink level monitoring feature. If you encounter any difficulties or have further questions, consult the printer’s user manual or contact Canon support for additional guidance.

Fix 7: Resolving Error Code E14 – The FINE Cartridge Cannot Be Recognized

Error Code E14 on the Canon TS3322 printer indicates that the printer is unable to recognize the installed FINE cartridges. Follow these detailed steps to resolve the issue:

Step 1: Remove and reinstall the FINE cartridges

  • Open the printer’s ink cartridge access door or panel.
  • Carefully remove each FINE cartridge from its slot.
  • Check for any protective tape, covers, or debris on the cartridges and remove them if present.
  • Reinsert the cartridges back into their respective slots, ensuring they are securely seated.

Step 2: Clean the cartridge contacts

Follow steps:

  • Turn off the printer and unplug it from the power source.
  • Remove the FINE cartridges from their slots.
  • Dampen a lint-free cloth or cotton swab with distilled water.
  • Gently clean the gold contacts on the cartridges and the corresponding contacts inside the printer.
  • Allow the contacts to dry completely before reinstalling the cartridges.

Step 3: Perform a printer reset

  • Plug in the printer and turn it on.
  • If the error code persists, perform a reset on the printer.
  • Refer to your printer’s user manual or Canon’s official website for instructions on how to perform a reset.

Step 4: Check for firmware updates

Follow steps:

  • Visit Canon’s official website and check if there are any available firmware updates for your printer model.
  • Download and install the latest firmware if updates are available.
  • Follow the provided instructions carefully to update the printer’s firmware.

Step 5: Try using different FINE cartridges

  • If the error continues after cleaning the contacts and performing a reset, it is possible that the FINE cartridges are faulty.
  • Borrow or purchase a new set of compatible FINE cartridges and install them in the printer.
  • Check if the printer recognizes the new cartridges and if the error code E14 is resolved.

Step 6: Contact Canon support

  • If the error code persists even after trying different cartridges, it is advisable to contact Canon support for further assistance.
  • Provide them with the details of the troubleshooting steps you have taken so far for more effective troubleshooting.

By following these steps, you should be able to resolve the issue of the FINE cartridges not being recognized, as indicated by Error Code E14 on your Canon TS3322 printer. If the error persists or if you require additional guidance, reach out to Canon support for further assistance.

Fix 8: Resolving Error Code E15 – The FINE Cartridge is Not Installed

Error Code E15 on the Canon TS3322 printer indicates that the FINE cartridge is not installed in the correct position. Follow these detailed steps to resolve the issue:

Step 1: Turn off the printer and unplug it from the power source.

  • This ensures your safety while working on the printer and prevents any electrical mishaps.

Step 2: Open the printer’s ink cartridge access door or panel.

Follow steps:

  • Locate the area where the FINE cartridge is installed. It is usually accessible by lifting a cover or panel.

Step 3: Remove the FINE cartridge and inspect it.

  • Carefully remove the FINE cartridge from its slot.
  • Check the cartridge for any protective tape, covers, or debris. Remove them if present.
  • Examine the cartridge for any visible damage or abnormalities.

Step 4: Reinstall the FINE cartridge in the correct position.

Follow steps:

  • Insert the FINE cartridge back into the slot, ensuring it is securely seated.
  • Align the cartridge with the designated markings or guides inside the printer.

Step 5: Close the ink cartridge access door or panel

  • Ensure that the door or panel is closed properly until it clicks into place.

Step 6: Plug in the printer and turn it on

Follow steps:

  • Plug the power cord back into the printer and ensure it is securely connected to a power source.
  • Turn on the printer and wait for it to initialize.

Step 7: Check if the error code E15 has been cleared.

  • Print a test page or perform a self-test to confirm if the printer recognizes the FINE cartridge and if the error is resolved.

If the error code persists or if you encounter any difficulties during the troubleshooting process, it is recommended to consult the printer’s user manual or contact Canon support for further assistance.

Fix 9: Resolving Error Code E13 – The Ink Has Run Out

Error Code E13 on the Canon TS3322 printer indicates that the ink in one or more cartridges has run out. Follow these detailed steps to resolve the issue:

Step 1: Check the ink status of the cartridges.

  • Open the printer’s ink cartridge access door or panel.
  • Check the ink levels of each cartridge to determine which one has run out.
  • If you find any cartridge with low or empty ink levels, replace it with a new one.

Step 2: Replace the empty ink cartridge.

Follow steps:

  • Remove the empty ink cartridge from its slot by gently pushing down on it and pulling it out.
  • Take the new ink cartridge out of its packaging and remove any protective tape or covers.
  • Insert the new cartridge into the appropriate slot, making sure it is securely seated.

Step 3: Close the ink cartridge access door or panel.

  • Ensure that the door or panel is closed properly until it clicks into place.

Step 4: Plug in the printer and turn it on.

Follow steps:

  • Plug the power cord back into the printer and ensure it is securely connected to a power source.
  • Turn on the printer and wait for it to initialize.

Step 5: Check if the error code E13 has been cleared.

  • Print a test page or perform a self-test to confirm if the printer recognizes the new ink cartridge and if the error is resolved.

Step 6: Dispose of the empty ink cartridge properly.

  • If you have replaced an empty ink cartridge, make sure to dispose of it according to local regulations or guidelines for proper electronic waste disposal.

By following these steps, you should be able to address the issue of an empty ink cartridge, as indicated by Error Code E13 on your Canon TS3322 printer. If the error persists or if you require additional guidance, consult the printer’s user manual or contact Canon support for further assistance.

Conclusion

Troubleshooting Canon TS3322 error codes can be resolved by following these step-by-step procedures. By understanding the error codes, such as E02 for paper jams, E03 for output tray issues, E04 for ink cartridge problems, E05 for unrecognised cartridges, E07 for improper cartridge installation, E16 for unknown ink levels, E14 for unrecognised cartridges, E15 for empty ink, and E13 for low ink, users can effectively resolve these issues. By carefully implementing the suggested fixes, users can regain functionality and minimise printer downtime. However, if difficulties persist, consulting the printer’s manual or reaching out to Canon support is recommended for further assistance. With these troubleshooting steps, users can confidently address Canon TS3322 error codes and optimise their printing experience.

FAQs

What does Error Code E02 indicate on the Canon TS3322 printer?

Error Code E02 indicates a paper jam issue in the printer.

How can I resolve Error Code E02?

Turn off the printer, remove the jammed paper, and check for any obstructions.

What does Error Code E03 mean on the Canon TS3322 printer?

Error Code E03 indicates a paper jam or a closed output tray.

How do I fix Error Code E03?

Open the output tray, remove any obstructions, and ensure it is securely closed.

What causes Error Code E04 on the Canon TS3322 printer?

Error Code E04 indicates ink cartridge-related issues, such as empty or incorrectly installed cartridges.

How can I address Error Code E04?

Replace empty cartridges with new ones or reseat the cartridges correctly.

What does Error Code E05 signify on the Canon TS3322 printer?

Error Code E05 occurs when the printer cannot detect the installed ink cartridges.

How do I resolve Error Code E05?

Remove and reinsert the cartridges and clean the cartridge contacts if necessary.

What does Error Code E07 mean on the Canon TS3322 printer?

Error Code E07 indicates that the cartridge is not installed properly.

How can I fix Error Code E07?

Remove and reinstall the cartridge in the correct position and ensure it is securely seated.

What does Error Code E16 indicate on the Canon TS3322 printer?

Error Code E16 suggests that the printer cannot determine the remaining ink level.

How do I resolve Error Code E16?

Press and hold the Stop/Reset button to disable ink level monitoring.