How to Fix Kmode Exception Not Handled Error

The dreaded blue screen of death is linked to a Windows 10 known as the Kermode Exception Not Handled fault. This problem is referred to by its full name and the KMODE EXCEPTION NOT HANDLED issue. Users of Windows have most likely seen this kind of problem occasionally for various reasons. Nevertheless, certain factors can lead to the Kermode Exception Not Handled error message.

The Blue Screen of Death (BSOD) is an issue that plagues Windows users regularly and may be pretty frustrating. It can cause system crashes in a variety of different ways. Blue screen of death (BSOD) faults that we have added include, amongst others, the nvlddmkm.sys blue screen error, the igdkmd64.sys blue screen error, and the SYSTEM SERVICE EXCEPTION blue screen problem. The Blue Screen of Death (BSOD) is typically accompanied by an error code that specifies the nature of the hardware problem that the system is now encountering. Users of Windows 10 have reported that the error “Kmode Exception Not Handled” has disrupted their experience on a widespread scale. These problems were present in Windows 8 as well. This article will go through several effective solutions for fixing the “Kmode Exception Not Handled” issue in Windows 10.

But if you do what needs to be done, this won’t be a huge issue, and you’ll be able to fix it in only a few minutes. Fortunately for you, there are steps you can take to ensure this. Keep reading what’s listed below to learn how to carry out the steps.

Note: If the blue screen prevents you from starting Windows try the adjustments indicated below. Regardless of whether you are using Windows 10 or an earlier version of Windows. Start Windows in Safe Mode and make the adjustments there. Remain aware that this pertains to you. Even if you are running an older version of Windows than Windows 10 right now. You should read Black Screen-Problems And Solutions

How to Fix Kmode Exception Not Handled Error
How to Fix Kmode Exception Not Handled Error

Why isn’t the Kermode Exception being handled, and what is it?

The Kermode Exception Not Handled error leads to a crash of the system. A system crash occurs whenever a Kernel Mode Program generates an exception, and the error handler cannot identify the exception’s nature. A typical symptom of this issue is the appearance of the error code 0x0000001E. On rare occasions, the system will repeatedly reboot itself.

The Kmode Exception error’s technical details are very in-depth and generally uninteresting. However, in a nutshell, it happens when software programs overwrite one another’s memory. This might result in errors or program crashes, or the instance of a blue screen. It can have a total impact on the system.

Said, part of the software on your computer has been corrupted, and the error handler that Windows uses does not know precisely what caused the problem. It only realizes that something is wrong and that it is to blame for the failure of the system in question.

See also  Computer Doesn't Recognize Phone

What causes the Windows 10 restart loop when a Kermode error occurs?

If you’re using Windows, having a blue screen loop that prevents you from accessing your operating system could be a significant problem. Your drivers may cause this issue; therefore, you should upgrade them. In a manner analogous to the System Thread Exception not Handled NTFS.sys error. It is necessary to either install an earlier version of the driver in question or bring it up to date if it is the problematic driver.

Suppose the issue stems from the setup of your BIOS. Before continuing, you should ensure that your settings are restored to their original state. Further instances of the error Kmode exception not being handled are comparable. The solutions that we found might also help address other problems that have been brought to people’s attention, including the following:

  • Kermode exception is not dealt with the following system files: NTFS.sys/netio.sys/ndis.sys/ syntp.sys/ wdf01000.sys/ etc.sys/ tcpip.sys/ tppwr32v.sys/ usbport.sys/ igdkmd64.sys/ intelppm.sys/ a – The system uses this to identify the file’s name that was the issue’s source. You can utilize this data to figure out whether the issue lies with the program or the hardware.
  • A Kermode exception did not handle overclock. It would help if you increased the CPU’s voltage.
  • Kermode exception did not handle RAM – Typically, this indicates that there is a defective RAM module that intermittently produces issues.
  • Also, Kmode exception is not handled USB – This error message denotes a problematic USB device or driver.
  • Kmode exception not handled during installation – Once more, a damaged driver incompatible with your PC can be the root of this error.
  • Kmode exception not handled loop – It shows that your computer’s graphics card drivers are outdated or incompatible.

While most frequently occurring on PCs, the issues mentioned above have also been verified on virtualization programs like VMware or VirtualBox.

The quick fix is to stop Quick startup.

The Fast Startup function in Windows 10 may contribute to this problem. It is a Windows feature that enables quick recovery from shutdown and hibernation, but it can also result in loading any previous driver issues. Disabling Fast Startup frequently prolongs the duration of your system’s uptime or perhaps resolves the issue altogether.

Follow these instructions to disable Fast Startup:

  • Use the Windows search box to look for “Control Panel” and choose the relevant result.
  • Next, pick “Power Settings” from the “System and Security” menu.
  • From the menu on the left, select the option that reads “Choose what the power buttons do.”
  • If prompted, click the blue link at the top of the screen that says, “Change settings that are currently available.”
  • Uncheck the “Turn on Fast Startup” option under the heading “Shutdown settings.”
  • After finishing, select “Save changes.”
  • You can attempt addressing the issue at its root if you’re still getting the Kermode Exception error after disabling Fast Startup or wish to fix the problem without sacrificing its advantages.
See also  Device Descriptor Request Failed | Windows 7/8/10 | Code 43

A problem driver update

Updating the driver is often all that is required to fix the Kermode Exception Not Handled error. This is because it is most likely that a driver issue was the cause of the error. But before you can fix it, you need to figure out which driver is causing the problem.

Your computer’s configuration will play a significant role in that, but Windows should be able to provide you with a reasonable hypothesis of the nature of the issue. When the blue screen of death occurs, you will typically see the following message: “Error: Kmode Exception Not Handled,” followed by a name enclosed in brackets. We want to upgrade the driver that has that name because it is the one that is causing the issue.

Search for that driver to determine what hardware it supports, then take the actions listed below.

  • In the Windows search box, enter “Device Manager” and click the resulting entry.
  • Right-click the hardware that matches the driver’s fault. From the drop-down option, select “Update driver.”
  • When prompted, select “Search immediately for updated driver software,” and then wait for the process to complete before continuing.
  • If that doesn’t work, you can always Google the hardware if the driver is for an add-in card or other hardware, or visit the manufacturer’s website for your motherboard to see if there is a fresh driver release. If so, choose “Browse my computer for driver software” as the third step option instead of downloading it and updating the driver manually.
  • The procedure can take some time, but your computer should no longer display Kmode Exception blue screen errors once finished.

Your RAM may be the issue.

Suppose you are still experiencing problems after making the adjustments described above. In that case, you are either exceedingly unlucky or may have a hardware issue that is the root cause of the damaged drivers. If the latter is true, the RAM in your computer is probably to blame for the problem. To discover whether or not this is the case, you can use the memory diagnostics tool included with Windows. In the Windows search box, type “Memory Diagnostic” and select the appropriate result from the list.

When you are ready to do so, click the option that says “Restart now and check for problems.” You can also select “Check for issues the next time I start my computer” if you have any ongoing work that needs to be saved. Before continuing the scan, make sure the reboot is finished first. If you experience any problematic issues, your RAM is likely defective; this could be why you’ve had to replace the blue screen (s). Else If you want to ensure there wasn’t a connection that came loose, you should try removing the RAM and reseating it. If that doesn’t work, your best option is to buy a new kit or replace the problem stick with a new one.

See also  How to fix your device isn't compatible with this version?

How can I resolve the Windows 11 Kermode exception not handled error?

Despite being more powerful, Windows 11 is still somewhat comparable to Windows 10. Regrettably, it also inherited many of the faults of the earlier OS. It also applies to the Kermode exception not handling the problem, which can seriously damage the system, as our readers informed us. We can benefit from the similarity between Windows 10 and 11. Since all the fixes we provided above work on the latest version of Windows. There are only a few minor variations. Delete applications by opening the Apps page from the Settings menu and selecting the Apps & Features option.


If you know what caused the issue, resolving the “Kmode exception not handled” error should not be an insurmountable challenge for you. The article offers some potential solutions, some of which consider factors that may or may not have contributed to the problem. In addition, you can retrieve any data that has been destroyed using Recoverit Data Recovery software. These are the potential remedies we proposed for the issues about the Kermode exception not being handled. We genuinely hope that you were able to find a solution to this problem. If you did, we would be curious to learn more about it.


What does KMODE EXCEPTION NOT HANDLED represent as a stop code?

The value of the KMODE EXCEPTION NOT HANDLED bug check is 0x0000001E. This suggests that an exception was created by a kernel-mode program and was not handled by the error handler.

How can I fix Windows 8’s Kmode exception not handled?

Choose “Power Options” after selecting “System and Security” from the drop-down menu. From the menu on the left, select the option that reads “Choose what the power buttons do.” If you are prompted to do so, click the blue link that says “Change settings that are currently available” at the top of the screen. Take off the checkmark from the box that’s labeled “Turn on Fast Startup”. Look for it under the heading “Shutdown options.”

Windows 10 has a Safe Mode boot option.

To boot into safe mode:
-Use Windows 11 or Windows 10.
-Relaunch the computer.
-Click Power > Restart while holding down the Shift key at the sign-in screen.
-Select Troubleshoot > Advanced Options > Startup Settings > Restart when the computer has reached the Choose an Option screen after restarting.

Can a power supply cause a blue screen?

Your computer may overheat, restart on its own, slow down, crash, or display the BSOD due to an inadequate power supply. Trying a new power supply is the most straightforward approach to testing a power supply.