How to make your phone say something when you plug it in

This is a lovely specialty feature that many people are unaware of. We regard connecting our phones as an errand and dismiss it. Also, when people see it, they usually go crazy and are taken aback. When the gadget is attached, we can play any sound we choose. To begin, we will examine how we may accomplish this on the iPhone, followed by Android. The most efficient way to make an Android phone say something when plugged in is given below if you are wondering How to make your phone say something when you plug it in.

You’ll learn how to make a phone say something when it’s linked to an Android device in this post. Let’s pretend you have a phone with a broken charging port. When you connect your gadget to charge it, it continues to charge and release, causing a host of problems.

While you may charge your phone correctly at this point, you should keep an eye out for periods when the broken port starts to cause problems. Likewise, if they have a few special requirements, some people may have difficulty determining whether their phone is charging. As many recent Android phones, today do not offer a charging alert, it is difficult to tell if the phone is charging or not.

The most efficient way to make an Android phone say something when plugged in

If you ask 10 people why they use Android, six would tell you that it is because of its versatility. And you enjoy tinkering with your phone’s settings, you’ll appreciate Android’s versatility over iOS.

If you can go through the extra step of setting up your Android phone, you can do anything with it. To reuse old phones, it is common for people to replace the factory-installed operating framework with their preferred OS. However, you are attempting not to replace your phone’s operating system here. Simply make your phone say something when connected, and the subsequent advancements will help you achieve this goal.

How to make your phone say something when you plug it in
How to make your phone say something when you plug it in

Changing the charging tone of root access

If you’re a fantastic enthusiast, you should already have an established phone. For obvious reasons, the most adaptive Android products have full access. When you root your phone, you gain complete control over it, including the ability to block your phone if something goes wrong. Regardless, if you carefully follow every step given in this article, you should not be destroying anything.

Before attempting to adjust the charging sound on your existing device, you should download an app like Dr.Fone or Kingoroot to gain root access. Following the establishment of your phone, you will approach your System UI sounds, which you will most likely be unable to access.

Before you press the root button, you should be aware that you will surely void your warranty. If you’re okay with it, setting up your phone will also cause some programs to stop operating. With that out of the way, let’s dive into how you may modify your charging sound after you’ve set up your Android phone.

See also  Android system webview

Transferring newly downloaded sounds

This is an important stage because the Android OS will only check the document’s name. We want to place the sound file in the correct location and identify it correctly. Otherwise, we won’t get the necessary sound and may potentially stop obtaining any charging sound.

Look for a sound file with the name “Dock” and the OGG format. The name of the file should be Dock only, until and unless it is changed. When you find the document, move it to another organizer and glue your file to it. Replace it with the file’s first name.

Locate a File explorer who has root access

Most File explorers are unable to access documents from the Android root. These are fundamental framework documents that, if altered, can cause your device to crash, so it’s best if standard programs don’t give you access to them. Nonetheless, some applications are specifically designed to access root files. If you have an established gadget, you should also have one as of now.

Go for File Explorer Root Browser or Root File Manager if you don’t have any of them.

Investigate the system on the file manager

The experience should be similar to that of a typical file administrator. When you pick them, you will see several organizers that lead to files. Regardless, the organizers should have weird indications that make it appear as if a programmer has undermined your gadget. Choose System from the list of options. Then, at that moment, locate and pick media and sound/. This organizer houses all of your system sounds’ documents.

Obtain an OGG media file to substitute for your charging audio

Before proceeding, a quick reminder that you will need another media document to make this work. To make this work, we recommend having another media document on your cell phone before proceeding. There seem to be a lot of OGG files on the internet. If you have an MP3 file that you believe your phone should play when connected, you can convert it completely to an OGG file using a web-based converter.

Copy and rename your new charging sound

The novelty of your charging sound is not checked by your phone. When you plug it in, it will access the media organizer, look for a file with a certain name, and play it. Most of the time, the name of the file should be associated with the charging. You can also find in you device but otherwise the name is Dock.

If that is a duty you can take, you can begin playing all of the curiously called noises to determine which one sounds precisely like your charging sound. When you discover the desired file, change it with a number after it. If the one you’re trying to use isn’t functioning right, you might need to reinstall it. You may now attach your new charging sound to a similar organizer and label it the same as the previous one.

Restart the device again and see if this works

As most of the system level modifications take place once the device is been restarted so, it is necessary to once restart your device to see the updated version. After rebooting your phone, put it into an electrical outlet to see if it is now operational. If it doesn’t take place then you can simply reverse your actions and all you can do is to recover your previous file. If it does, you already understand how to produce your Android phone say something when paired. Sit back and hope that a friend will insist on seeing how you made that famous song your charging tune.

See also  AT&T APN settings

Why not make your iPhone say something when you plug it in?

In this section, we’ll look at how to create a little sample to play when you plug in your iPhone. In any case, before we begin, please confirm you meet the following requirements:

Because the automation highlight debuted in iOS 14, you’ll need iOS 14 or the higher models to hear the audio effect. As a result, you must either update your iPhone application or use a different device.

Aside from the iOS form, you must also have the “shortcut appss” on your iPhone. You do not need to download the application because it is already installed. However, if for some reason you deleted the program, you can download it from the App Store by clicking here. We can proceed to the help once you have confirmed that your iPhone meets the criteria.  Use the given methods to set the audio.

Begin new automation

If you are unfamiliar with the “Automation” feature introduced by Apple in iOS 14, don’t worry. Automation is required for the “shortcut application,” which consists of simple routes with a single stated trigger.

1. Turn on your iPhone and access the App Store “Go to the “Shortcut app” of the “Alternate methods application.”

2. From the section, tap the “+” symbol, then “Create Personal Automation” (If you can’t see the “+” symbol, skip it and tap Create Personal Automation).

Choose a “Charger” Trigger

As the name implies, we will use a charging trigger to detect whether or not an iPhone is connected. The trigger will perform the action we specify, and then we can create our bespoke automation.

  • Scroll to the bottom the menu’s list of triggers until you find one that says “charging.”
  • Click on it, and then you’ll have multiple options to choose from. When our iPhone is linked, we have the following options to fulfil our goals:
  • Is Connected: This will prompt Siri to say anything we require; this is the option we must select.
  • Is Disconnect: When you disconnect your iPhone from the network, Siri will activate. Alternatively, you can select both options to hear the Siri voice at the same time, such as when associating and removing the link.
  • After selecting the option, hit “Next” to go to the next stage.

Activate the “Speak Text” Action

Now comes the fun part: we can enter anything we want Siri to say whenever we associate/disconnect the connection.

  • After completing the previous step and pressing “next,” you should see the Use the “Add Action” button, click on it, or use the navigation bar.
  • There on the top of the list you’ll see “Speak Text”, tap on that icon and proceed further.
  • When you notice the “Speak Text” confine, tap on the “Text” confine, which will be blue and look isolated button.
  • After pressing the “text” button, you may customise what Siri says when this routine begins. You can write whatever you like, however, keep in mind that the content is not case sensitive.
  • After you are done with what Siri has to speak, write that text there. You can also change Siri’s voice by adjusting the language, voice, pitch, rate, and so on.
See also  Why Wont My Phone Charge? | Fix Android or iPhone won't charge

NOTE: You can expand on this automation by adding audio cues after Siri reads the text or instructing Siri to wait for a certain amount of time before speaking. We would advise using delayed speech to stun people and leave them perplexed.

Stop “Ask before running”

This one is a very important stage as the automation will constantly ask you for the permissions that you have to grant so that it can utter the sound. Furthermore, this completely negates the objective of incorporating automation in the first place.

  • When you’re satisfied with the automation settings, press the “Following” button to turn it off. the “Ask before running” switch.
  • If you get an affirmation short for something similar, offer it affirmation. This is significant since this brief will be shown repeatedly after automation is turned off if you don’t allow it.
  •  As soon as you are done with the settings, click on the icon ”Done” so as to proceed further and by this, your automation will be completed.

So, here comes the part we all were waiting for that is to hear whatever we write from Siri, So for this, all you need to do is to connect the power link or remote charger. The best part is that Siri will respond whether the iPhone is in Silent or Ring mode.

NOTE: When the automation is activated (when the charger is connected), the iPhone will receive a notification stating that the automation is active (and more subtleties). This message will appear before the automation, which means you will see it before Siri speaks. This is useful if you want to know whether or not the automation is being activated.

Conclusion

In the article, we covered how to make your phone say something when you plug it in or out. The technique will be a lot easier to follow if you have an iPhone. We recommend going over the benefits and drawbacks of setting up your device before giving it a shot. Also, if the pull you want to do isn’t for you, we recommend that you avoid it. Except when testing a more experienced Android device.

Playing with your phone’s framework settings is a lot of fun. While the most typical method of setting up your phone and the threats associated with it can be overwhelming, you generally feel more delighted about getting it done. Nothing, however, is more devastating than bricking your phone while attempting to change the charging sound. If you’re not completely confident in your fiddling abilities, your prior charging sound can sound much better!